The current owner purchased this Corvette in the summer of 75, and it has remained in his garage ever since. It’s original code 74 Dark Red paint is still in very nice shape, and has had some cosmetic repaint work done to repair stone chips a few years back. The code 142 referred to by many as “Silver moon” interior still looks very nice and has survived well. This is rare interior color fior 1975, less than 1000 units of the 38,000+ came equipped this way. Mileage claim is supportable, based on how clean the date coded side glass is, firmness of window regulators, lack of substantial interior wear in driver’s compartment, as well as limited wear showing on pedal rubbers. Left seat bolster wear along with carpet wear are present, and acceptable for this level of mileage. The underbody is very solid, no frame damage or rot ever, easily seen because it has NOT been masked with undercoat.Cosmetic oxidation and surface rust are present, and could certainly clean up and detail out nicely if one so chooses.  Original bonding strips signify no past collision history.  The engine, transmission and rear end have all been verified as “number’s matching” by Jason Phillips, owner of Auto Appraise Inc. The car runs and shifts excellent, has recent tires and updated stainless calipers with newer pads. The stock A/C blows cool and all equipment is in good working order, right down to the ignition buzzer. Comes with original owner paperwork. You’re invited to come and see for yourself or send an appraiser. We have over 50 photos and a detailed narrative report that was written after a 3 hour long inspection and test drive were completed. Contact our office for a password to view report and more pics. http://www.autoappraise.com . e-mail us cars@autoappraise.com. 800-301-3886 Click on the link below to see a walk around video that’s about 2+ minutes long. We are asking $14,900.00.

UPDATE: Thanks for looking, we have sold this client’s car.

Technorati Tags: auto appraisals, auto appraiser, chevrolet, classic car, corvette, numbers matching

1970 Plymouth Cuda AAR for sale 44,000 actual miles in Michigan
Stock original number’s matching J code 340 6 pack motor. Stock original A833 numbers matching 4- speed trans with pistol grip. Original Trans Am fender tags, original build sheet. High end repaint in correct code EF8 Ivy Green Metallic. Metallic flow-out is excellent panel by panel. No evidence of tape lines, run, or overspray. Excellent reflective quality where bold print can be read in reflection from 24” away. Correct style matte finish on top of hood, fenders, spoiler, and doors. OEM replacement AAR decal kit. Amazing example of an un-hit, factory survivor original body. Factory spot welds are visible all along lips of door skins where wrapping shell, all along quarter panel seams and door jams, wheel lips, pinch welds, and the like. No replacement sheet metal and no repair panels evident. Digital paint gauge readings were recorded during this report. No evidence of heavy filler content noted anywhere in vehicle. 95% of body has very good magnetic adhesion. Exterior body is super clean and straight, straighter than production period. Doors open and close nicely, with no notable sag. Hinge pins are original. Sill plates appear to be original units, and show no signs of heavy scuffing due to sagging doors. Original fiberglass hood is in excellent condition, due to its straightness and flatness. (note that most fiberglass hoods inspected have a bow in the center created by hood spring tension). This car has never had hood springs installed (although they are included with car). Impressive interior equally well survived in every way, showing practically no casual wear, well supportive of the miles showing. The exceptions are heat cracks in vinyl dash pad, which was ordered to replace, but never installed, and the hidden aftermarket CD player in the glove box, wired to the aftermarket 6×10 speakers mounted in the rear package tray. Steering wheel, dash components, seats, carpets, headliner and door panels are all in excellent condition. Excellent trunk with solid original pan. Spare, jack, mat are present. Underhood area is detailed to showable quality, solid in every way. Factory matched core support stamp, all decals, and stock ignition set up. Except for intake, underhood is bone stock original. Underbody is very solid. No torn dye holes, no crooked rails, all original ribs in floor panels are easily seen. No patches or decay. Original plugs still mounted in lower ¼ panel splashes. This is what garage kept low miles original really looks like. Recent carb work adds to how well it runs. It starts and idles as it should. The clutch feels strong and the brakes stop nice and straight. It’s a lot of fun to drive. We have a full 5 page written report that outlines every detail about the car, as well as nearly 200 pictures. A YouTube test drive video will soon be available to view the car running and driving. We are asking $78,500, and no partial trades are being considered unless you have a late model, very low miles Corvette. Reply to cars@autoappraise.com or link to our website at http://www.autoappraise.com . 810-691-2664. Thanks

UPDATE: Thanks for looking, we have sold this client’s car.

Technorati Tags: 1970 Plymouth Cuda, AAR, classic car, E body, for sale, Mopar, muscle car, numbers matching, Trans AM

Auto appraiser Jason Phillips recently inspected this code 912A silver blue 1963 Split Window. The car was ordered sold by the court of local jurisdiction, who assigned the work to auto appraiser Jason Phillips and staff. It had the same owner since 1964, and has a very nice original interior. It features correct 63 gages, correct 63 only adjustable seat frames, but it does have a 64 hood. It has a solid, unrestored underbody, good solid frame, and runs well, with it’s correct 300hp number’s matching motor and original 4 speed. In the history of Corvettes, this was the 1st coupe ever available in the Corvette line. It also was the introduction of IRS, replacing the “straight axle” set up with nylon straps. This car has a driver quality, older repaint that was never really sanded and buffed out very well. A wet sand and wheel will bring it up a couple notches. If you are interested in purchasing this car, please contact me. 810-694-2008. The asking price is $39,500.

Technorati Tags: chevrolet, corvette, numbers matching

I knew when I was walking up the driveway on this last auto appraisal that there was going to be drivability issues. The left rear tire had some major negative camber issues. This is spotted easiest by kneeling down behind the car from 20 feet away, and looking at the tilt of the rear tires. It can be adjusted some, by rotating the cam washer, or replacing the non-adjustable lower torsion arms with aftermarket adjustable ones. The car had all original bonding strips in place, and a very good original un-hit frame. The dog leg caps had some rust, but nothing structural to be concerned about. On the high side, it had a tank sticker, both tops, and was a numbers matching big block 427 car, with the original muncie and original rear end. The rest of the suspension had been rebuilt, which was nice. It ran surprisingly well, and had really nice paint, for a 20 year old respray. It’s still for sale, the guy want’s $25,000. Contact us if you are interested in this car. 800-301-3886

Technorati Tags: 427, big block, corvette, for sale, numbers matching

Certified auto appraiser Jason Phillips has recently inspected both a 66 and 67 GTO. The post December 1966 build date for 67 models makes it a whole lot easier on verification of engines. Pontiac Motor Division began Stamping VIN’s on the motor in Mid December, 1966. If you have the still original block in a 1967, then it SHOULD be stamped next to the timing chain cover, just beyond the lower radiator hose inlet. The stamp is vertical, and often up higher on the pad. This 67 was clearly marked. The seller had the PHS documentation, even better. If you’re a buyer, and he/she does not have PHS, be sure to order it. Jim at Pontiac Historical Services can fax you back the essentials on a car history in about a day’s time. It’s well worth the money he charges to have this in hand. There you’ll find the engine unit number on the car’s billing history to match up against the right front engine stamp. This was especially useful on the 66 I did, as there was no vin stamp on the 66’s. The PHS will also provide other build history on the car. I have 265 inspectors at work nationwide, and I never send one out to do a Pontiac inspection before I order my PHS on line. The 66 turned out to be very nice, but not a matching car. It’s still for sale if you’re looking for one.

Technorati Tags: 1966, 1967, GTO, numbers matching, Pontisac

So many people ask me when I’m conducting an auto appraisal if I can confirm the “matching numbers” on the motor and transmission. When selling, seller’s often refer to their cars as numbers matching, but only because most of them cannot be confirmed on sight. FE blocks (12 versions in all) for the most part were not vin stamped, unlike GM cars and Mopar’s. Casting dates is about all you’re going to end up with off the engines. During an on site inspection, these are not possible to see on a small block, unless you brought your tool box! Some dis assembly IS required.

Technorati Tags: ford, mustang, numbers matching